KRE Logo

Cam and Valve Train

Crower Cams & Parts

The following are all hydraulic cams

Crower 60916 (278H) Beast Cam $ 225.00

Adv. duration 278/289
.050 duration 221/229
Lobe sep. 112
.455/.470 lift w/1.5 rocker

Crower 60919 (304H) Beast Cam $ 225.00

Adv. duration 304/316
.050 duration 231/240
Lobe sep. 112
.470/.470 lift w/1.5 rocker

Crower 60243 (284HDP) Ultra Performance Cam $ 225.00

Adv. duration 284/290
.050 duration 228/235
Lobe sep. 112
.479/.494 lift w/1.5 rocker

Crower 60244 (297HDP) Ultra Performance Cam $ 225.00

Adv. duration 297/308
.050 duration 239/241
Lobe sep. 112
.500/.500 lift w/1.5 rocker

Crower 60245 (HDP) Ultra Performance Cam $ 225.00

Adv. duration 311/316
.050 duration 248/253
Lobe sep. 112
.512/.524 lift w/1.5 rocker

The following are some of the most common Hyd. roller cams we use

Kauffman HR224 $ 475.00

Adv. duration 278/289
.050 duration 224/230
Lobe sep. 112
.502/.510 lift w/1.5 rocker

Kauffman HR230 $ 475.00

Adv. duration 284/295
.050 duration 230/236
Lobe sep. 112
.510/.520 lift w/1.5 rocker

Kauffman HR236 $ 475.00

Adv. duration 290/301
.050 duration 236/242
Lobe sep. 112
.540/.540 lift w/1.5 rocker

Kauffman HR242 $ 475.00

Adv. duration 296/307
.050 duration 242/248
Lobe sep. 112
.544/.546 lift w/1.5 rocker

Kauffman HR248 $ 475.00

Adv. duration 302/313
.050 duration 248/254
Lobe sep. 112
.548/.549 lift w/1.5 rocker

Valves Springs

#68404 - 1.625" installed height, 1.46" dia. $ 175.00 #68405 - 1.750" installed height, 1.46" dia. $ 175.00

Lifters

#66056 - Hyd. flat tappet lifters $ 115.00

#66963 - Solid flat tappet lifters with oil restriction $ 195.00 #66260 - Solid roller lifters (pushrod centered)with oil restriction $ 540.00 #66294 - Soild heavy duty roller lifters (pushrod centered) restricted $ 670.00 #66295 - Solid heavy duty roller lifters (.180 off on int., centered exh.) restricted $ 750.00 #66299-.903 - Solid heavy duty roller lifters (.180 off on int., centered exh.) restricted $ 945.00 #66299-.903 - Solid heavy duty roller lifters (pushrod centered) restricted $ 945.00 #66299-.937 - Solid heavy duty roller lifters (.180 off on int., centered exh.) restricted $ 945.00 #66299-.937 - Solid heavy duty roller lifters (pushrod centered) restricted $ 945.00

#72334-16 - Hyd. roller lifters $ 525.00

#ST2202-16 - Short travel hyd. roller lifters $ 825.00

Custom grinds available for all of our cams!

#51- series - Off the shelf cams (any number you want) $ 235.00

#852-16 - Hyd flat tappet lifters $ 115.00

Custom cam (hyd. or solid flat tappet) $ 255.00

Custom Hyd roller cam $ 475.00

#857-16 - Hyd roller lifters $ 645.00

Custom solid roller cam $ 475.00

#859-16 - Soild roller Lifters $ 675.00

Valve Train Parts

10 degree steel retainers $ 70.00
10 degree locks $ 30.00
Stock replacement keepers $ 8.00
Lash caps$ 48.00
10 degree Titanium retainers $ 375.00
7/16" poly locks$ 42.00
7263-16 - 9.300 5/16" Pushrods $ 135.00
7262-16 - 9.130 5/16" Pushrods $ 135.00
Custom length 5/16" chrome moly pushrod (any length in .050 increments) $ 165.00
Custom length 3/8" chrome moly pushrod (any length in .050 increments) $ 185.00
Bronze Distributor gear $ 70.00

Pro-fit PC valve seals .500 $ 24.00 Pro-fit PC valve seals .530 $ 24.00 Hardened Valve shims (.015/.030/.060 available) $ 9.00

Our aluminium valley pans come with bolts ready to install. Alum. Valley Pan

$ 45.00

Our stud girdles are light weight and come with 7/16's adjusting nuts. They are guaranteed not to break or bend under normal racing engine use. For standard D-port, E-heads and KRE High Ports. $180.00

D-Port heads	Edelbrock heads	High Port heads

9 keyway billet timing chain. We have them in std., .005 & .010 under It's The Best! $ 135.00

Std.	.005 under	.010 under

Cam & Crank keys Stock replacement cam key. $ 2.00

Stock replacement crank key. $ 3.00

E-mail KRE

kre@kauffmanracing.com

Call, E-mail or fax your orders!!! 740 599-5000 740 599-5550 Fax Open Mon. thur Fri. 9 to 5 unless we're racing!!

Daily UPS Shipping
Kauffman Racing Equipment 22280 Temple RD Glenmont, OH 44628